Authorized GE install & service
Made in Camden, South Carolina. 70-90% US content. Long warranties.
GE Appliances Air and Water is the US-manufactured residential water-heater line, built at a 240,000-square-foot plant in Camden, South Carolina at 70 to 90% domestic content. The lineup is built around the RealMAX gas and electric series and the FlexCapacity electric series, with more than 45 SKUs covering the standard 30, 40, and 50-gallon sizes. Titan installs and services the full GE residential line across Tampa Bay.
- Residential lineup: RealMAX gas (including Power Vent), RealMAX electric, FlexCapacity electric
- Standard 30, 40, and 50-gallon capacities, with 45+ SKUs across configurations
- 40,000 BTU gas burner on select 40 and 50-gallon natural gas units
- Available 8, 10, and 12-year warranty tiers depending on the model
- Made in Camden, South Carolina at 70-90% domestic content
The GE residential lineup, in plain terms
RealMAX gas is the standard atmospheric-vent gas tank, the right pick for most Tampa homes with an existing gas service and a roof vent. RealMAX gas Power Vent uses a blower to side-wall vent instead of running a flue up the roof, useful for retrofit installs where the original venting path is no longer available. RealMAX electric is the standard 240V tank, simplest install, no venting required. FlexCapacity electric is the higher-capacity electric line built for households that run two showers in parallel.
Quick recovery on the 40K BTU gas models
The 40 and 50-gallon natural-gas RealMAX units carry a 40,000 BTU burner, near the top of the residential range. Practical translation: after the morning rush of three back-to-back showers and a dishwasher cycle, a 40K-BTU GE tank recovers to full hot in roughly 50 to 60 minutes, where a 32K-BTU unit takes closer to 80. That matters if your household runs hot water in bursts rather than at a steady pace.
Why the Camden plant matters
GE's residential water heaters are assembled at a single $60-million plant in Camden, South Carolina with 70 to 90% US content. Practical upshots for a Tampa homeowner: shorter supply chains mean parts availability stays reliable during regional events (hurricane season is the relevant one for us), warranty replacements ship from inside the country, and the unit you get isn't pulled from a multi-country bin lot. Over 350 dedicated employees build to one US spec.
Pick a warranty term, not just a model
GE offers the same physical units under 8, 10, and 12-year warranty tiers. Step up to the longer term and you get a heavier anode rod, a beefier dip tube, and longer parts coverage for an extra $100 to $250 on the front end. In Tampa's hard water, the 10 or 12-year tier is usually the right call, the upgrade pays for itself if the tank lasts even two years longer than the 8-year version.
Service, install, and ongoing maintenance
Every GE install is permitted and inspected by Hillsborough County. We size the unit to the household's actual demand and fuel type, register the warranty in your name on install day, and offer an annual flush plan so the tank reaches its rated warranty life instead of failing early on Tampa sediment.
Why hire Titan for GE
- Permitted and inspected installs to Florida Building Code
- Tampa-licensed plumbers (CFC1430231), never subcontracted
- Annual maintenance plans keep the warranty valid
- Same-day service in most of Tampa Bay